Link Search Menu Expand Document

DNS Proxy Policies

Configuration > Templates & Policies > Templates

If you select ON, complete the following steps to configure and define your DNS Proxy policies.

NOTE: This feature is configurable only if you have loopback interfaces configured.

  1. Choose whether you want the DNS Proxy enabled by selecting ON or OFF.

  2. Select the name of the loopback interface or LAN-side label associated with your DNS proxy.

  3. Enter the IP addresses for Server A in the Server A Addresses field.

  4. Choose whether you want Caching to be ON or OFF. If selected, the domain name to the IP address mapping is cached. By default, caching is ON.

  5. Enter the domain names of the Server A for the above IP addresses.

  6. Enter Server B IP addresses in the Server B Addresses field. Server B will be used if there are no matches to the Server A domains.

NOTE: You can Clear DNS Cache. This will erase the domain name to the IP address mapping you had cached for both Server A and B.

Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America