Link Search Menu Expand Document

Flow Export Template

You can configure your appliance to export statistical data to NetFlow and IPFIX collectors.

  • The appliance exports flows against two virtual interfaces—sp_lan and sp_wan—that accumulate the total of LAN–side and WAN–side traffic, regardless of physical interface.

  • These interfaces appear in SNMP and are, therefore, “discoverable” by NetFlow and IPFIX collectors.

  • For more information about Custom Information Elements, see Flow Export Tab.

  • Enable Flow Exporting allows the appliance to export the data to collectors (and makes the configuration fields accessible).

  • The Collector’s IP Address is the IP address of the device to which you are exporting the NetFlow/IPFIX statistics. The default Collector Port is 2055.

  • In Traffic Type, you can select as many of the traffic types as you want. The default is WAN TX.

  • Click the Anonymize IPs check box to enable anonymizing IP addresses in log messages. If enabled, select an option from the Bit Masking drop-down menu to indicate how IP addresses have bit masking applied in log messages.


Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to Aruba EULA.

Open Source Code:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America