Link Search Menu Expand Document

User Management Template

Use this tab to manage the default users and, if desired, require a password with the highest user privilege level when using the Command Line Interface.


Default User Accounts

  • Each appliance has two default user accounts, admin and monitor, that cannot be deleted.

  • You can, however, assign a new password to either one and apply it to any appliances you want.

Command Line Interface Privileges

  • The Command Line Interface (CLI) for physical EdgeConnect appliances has three command modes. In order of increasing permissions, they are User EXEC Mode, Privileged EXEC Mode, and Global Configuration Mode.

  • When you first log in to an EdgeConnect appliance via a console port, you are in User EXEC Mode. This provides access to commands for many non-configuration tasks, such as checking the appliance status.

  • To access the next level, Privileged EXEC Mode, you would enter the enable command. With this template, you can choose to associate and enforce a password with the enable command.

Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America