Link Search Menu Expand Document

Getting Started

Orchestrator enables you to globally monitor performance and manage EdgeConnect (EC) appliances, whether you are configuring a WAN Optimization network (NX, VX, or VRX appliances) or an SD-WAN network (EC or EC-V appliances).

On this page:

Supported Browsers

Orchestrator and the Appliance Web user interfaces support the following browsers:

  • Google Chrome (recommended)

  • Microsoft Edge

  • Mozilla Foxfire

  • Opera

  • Safari

We recommend that you use the latest version available for your browser.

Guidelines for Creating Passwords

  • Passwords should be a minimum of eight characters.

  • There should be at least one lower case letter and one upper case letter.

  • There should be at least one digit.

  • There should be at least one special character.

  • Consecutive letters in the password should not be dictionary words.

Overview of SD-WAN Prerequisites

With Orchestrator, you create virtual network overlays to apply business intent to network segments. Provisioning a device is managed by applying profiles.

  • Interface Labels associate each interface with a use.

    • LAN labels refer to traffic type, such as VoIP, data, or replication.

    • WAN labels refer to the service or connection type, such as MPLS, internet, or Verizon.

  • Deployment Profiles configure the interfaces and map the labels to them, to characterize the appliance.

  • Business Intent Overlays use the Labels specified in Deployment Profiles to define how traffic is routed and optimized between sites. These overlays can specify preferred paths and can link bonding policies based on application, VLAN, or subnet, independent of the brand and physical routing attributes of the underlay.

    This diagram shows the basic architecture and capabilities of Overlays.


Including a new appliance into the SD-WAN fabric consists of two basic steps:

  1. Registration and discovery. After you Accept the discovered appliance, the Configuration Wizard opens.

  2. Provisioning. Because the wizard prompts you to select profiles, it is easier to create these ahead of time.

The following figure shows the process of installing and provisioning an appliance for SD-WAN.


Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP.

To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

This product includes code licensed under certain open source licenses which require source compliance. The corresponding source for these components is available upon request. This offer is valid to anyone in receipt of this information and shall expire three years following the date of the final distribution of this product version by Hewlett Packard Enterprise Company. To obtain such source code, please check if the code is available in the HPE Software Center at but, if not, send a written request for specific software version and product for which you want the open source code. Along with the request, please send a check or money order in the amount of US $10.00 to:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America