Jitter Summary
Monitoring > Tunnel Health > Jitter > Summary
The Jitter chart shows the tunnels that have the most Jitter. Statistics are summarized for the selected time period. Jitter can be caused by congestion in the LAN, firewall routers, bottleneck access links, load sharing, route flapping, routing table updates, and timing drifts.
Back to top
© Copyright 2023 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to Aruba EULA . Open Source Code: Hewlett Packard Enterprise Company Attn: General Counsel WW Corporate Headquarters 1701 E Mossy Oaks Rd Spring, TX 77389 United States of America