Link Search Menu Expand Document

Appliance CPU Usage

Support > Reporting > Appliance CPU Usage

The charts on this page provide real-time views of combined and individual CPU usage statistics for a single selected appliance. Charts show the past five minutes of usage and refresh every five seconds. By default, only total utilization is displayed on the charts. You can toggle the available statistics on or off by clicking the sample indicator line next to each statistic name.

NOTE: On appliances with Boost enabled, it is common for non-CPU0 cores to run at or close to 100%. CPU0 will show occasional spikes of high usage when statistics are rolled up and archived.


Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America