Link Search Menu Expand Document

Internal Drop Trends

Support > Reporting > Dropped Packet Trends

The Internal Drop Trends report shows internal packet drop trends for a single selected appliance. The charts that are displayed will vary according to the cause of the drop.

Charts are available in real time or for a specific time period. Real time charts show drops over the last five minutes and refresh every five seconds.

img

You can customize the chart settings using the controls at the top of the tab, as follows:

Option Description
Time period Click Real Time to enable live statistics for all available interfaces.

Click a predefined time period (1h, 4h, 1d, 7d) to display statistics over the last hour, four hours, day, or seven days.

Click Custom and set your own custom time range to display statistics for that time period.
Show in UTC Click this option to toggle chart times between local appliance time or UTC.
Large Click this option to toggle the size of the charts between smaller (default) and large.
Lock Scale By default, each chart uses its own scale that is relative to the data displayed. Click this option to apply and lock the same scale to each chart.
Refresh
img
Click the Refresh button to fetch data again for the selected time period.
Granularity When a custom time period is used, select the granularity level to be applied to charts (Minute, Hour, or Day).

Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP.

For third-party trademark acknowledgements, go to Trademark Acknowledgements. All third-party marks are property of their respective owners.

To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

This product includes code licensed under certain open source licenses which require source compliance. The corresponding source for these components is available upon request. This offer is valid to anyone in receipt of this information and shall expire three years following the date of the final distribution of this product version by Hewlett Packard Enterprise Company. To obtain such source code, please check if the code is available in the HPE Software Center at https://myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific software version and product for which you want the open source code. Along with the request, please send a check or money order in the amount of US $10.00 to:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America