Link Search Menu Expand Document

System PoE State

Support > Reporting > System PoE State

The System PoE State tab displays the PoE resources for the appliances selected in the appliance tree. The Show PoE appliances only checkbox filters the table to display only appliances that support PoE. This checkbox is selected by default.

Descriptions of the fields on this tab follow:

Field Description
Appliance Name of the appliance.
Available Power (W) Maximum power available for provisioning active PoE ports. This is the usable power available to devices connected to the appliance.
Drawn Power (W) Power (watts) drawn by connected devices.
Remaining Power (W) PoE power (watts) still available.
Input Voltage (C) Total voltage available on the appliance.
Temperature (°C) Temperature of appliance PoE interfaces.

Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP.

To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

This product includes code licensed under certain open source licenses which require source compliance. The corresponding source for these components is available upon request. This offer is valid to anyone in receipt of this information and shall expire three years following the date of the final distribution of this product version by Hewlett Packard Enterprise Company. To obtain such source code, please check if the code is available in the HPE Software Center at https://myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific software version and product for which you want the open source code. Along with the request, please send a check or money order in the amount of US $10.00 to:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America